石家庄电动叉车日常点检有哪些步骤?
2021-03-151109次
大家好,我是二手叉车石家庄叉车租赁小编,今天为大家介绍一下电动叉车检查的一些步骤。
hello everyone, i'm a second-hand forklift in jinan. today, i'd like to introduce some steps of the inspection of jinan electric forklift.
精心保养电动叉车,使电动叉车手感好。确保叉车的安全,就是保证自己工作和生活的安全。
carefully maintain the electric forklift to make it feel good. to ensure the safety of forklift is to ensure the safety of your work and life.
电动叉车警告:在检查电气系统前,除了检测灯具和检查工作性能外,还必须先关闭钥匙开关,拔掉插头。禁止使用有故障的叉车。小故障会导致大事故。
warning of electric forklift: before checking the electrical system, in addition to checking the lamps and working performance, you must first turn off the key switch and unplug the plug. it is forbidden to use the forklift with fault. small faults can lead to big accidents.
一、泄漏检查:液压油、电解液、制动液。
1、 leakage inspection: hydraulic oil, electrolyte, brake fluid.
检查液压管路接头、蓄电池和刹车系统有无漏油或漏气,触摸和目视检查,不要使用明火。
check the hydraulic pipe joint, battery and brake system for oil or air leakage, touch and visual inspection, do not use open fire.
二。轮胎的检查
two. tire inspection
检查轮胎的地面,避免是否有损伤,轮胎的磨损程度是否超过安全警戒线。
check the ground of the tire to avoid any damage and whether the wear degree of the tire exceeds the safety warning line.
2、当轮胎损坏或磨损超过安全警戒线时,应及时更换。
2. when the tire is damaged or worn beyond the safety warning line, it shall be replaced in time.
三。系统检查:
three. system check:
1. 刹车踏板检查:检查刹车踏板,看在减产过程中是否存在减速或卡阻,油门/刹车是否灵敏有效。
1. brake pedal inspection: check the brake pedal to see if there is deceleration or jamming in the process of production reduction, and if the accelerator / brake is sensitive and effective.
2. 检查制动液:打开制动油杯盖,检查制动液量是否在刻度范围内。如体液不足,请补充。
2. check the brake fluid: open the brake oil cup cover and check whether the brake fluid volume is within the scale range. if the body fluid is insufficient, please supplement.